Cobra Regulator
The Cobra regulator/vaporizer delivers superior performance and excellent pressure output consistency. Cobra offers greater service life and is ideal for applications with controlled emissions. Its primary pin design and fluorosilicone diaphragm offer superior chemical resistance, resistance to over pressurization, and cold weather operation. Use of the standard blue secondary spring provides -1.5" w.c. (0.37 kPa). The optional orange secondary spring provides -0.5" w.c. (0.12 kPa) output.
Impco No. | Genuine Impco Part No. | Alternative Part No. | Description |
Cobra | A000014713 | NA | Regulator, Converter LH LPG, Daewoo A218495 |
C250A Regulator
The ALGAS C250A model regulator/vaporizer is a two-stage, pressure reduction regulator. Variations of the regulator use water heated or an air heated element (used with air cooled engine applications). The C250A includes two side mounting holes.
Impco No. | Genuine Impco Part No. | Description |
C250A | 0971592 | Converter Assembly |
CS4-30772-004 Low Pressure Regulator
Impco No. | Genuine Impco Part No. | Description |
CS4-30772-004 | A000029718 | 2004-5 2.0/2.4L Mitsubishi Engine LPG DBW Spectrum II |
Model E Regulator
The Model E is an engine heated two-stage regulator/vaporizer. The Model E provides a choice of two negative outlet pressures. A blue secondary spring to provide a -1.5" w.c. (0.37 kPa) output and an optional orange secondary spring, provides -0.5" w.c. (0.12 kPa) output. A manual primer is standard on the Model E.
Impco No. | Genuine Impco Part No. | Alternative Part No. | Description |
EB | A000050516 | Model E Blue Spring with Silicone Diaphragm |
EPR-50388-001 Electronic Pressure Regulator
The EPR-50388-001 electronic regulator is used for ECU controlled certified fuel systems. Unlike the Model "J" and COBRA regulators which operate on engine vacuum, EPR-50388-001 controls the fuel mixture using an electric coil driven by the ECU.
Impco No. | Genuine Impco Part No. | Description |
EPR-50388-001 | A000035859 | Electronic Pressure Regulator |
HK-53721-002 Vaporizer
This controller assembly, for Nacco applications, includes a filter and electric fuel lockoff.
Impco No. | Genuine Impco Part No. |
HK-53721-002 | A000041567 |
Model J Regulator
The Model J regulator/vaporizer delivers reliable performance and pressure output consistency. Its reliability, especially with questionable fuel quality, has made it an industry standard for many years. Two vapor outlet pressures are available. The standard JB blue provides -1.5" w.c. (0.37 kPa). The optional JO provides -0.5" w.c. (0.12 kPa). The port size and mounting pad locations are identical to the Cobra regulator and include a primary pressure test port and "left" or "right" fuel outlets.
Impco No. | Genuine Impco Part No. | Alternative Part No. | Description |
JB | A000050513 | Model J Orange Spring with Silicone Diaphragm w/Primer |
Model KN Regulator
The Model KN is a secondary regulator designed for maximum sensitivity and simple, trouble free operation. It is suitable for use with low pressure, Natural Gas and LPG Vapor fuels. This regulator is typically used in service applications up to 30 kW (40 hp). A new high flow capacity unit is also available with a 1/2" orifice, suited for service applications up to 37 kW (50hp).
Impco No. | Genuine Impco Part No. | Description |
039-12 | A000029677 | Model KN Regulator |
Model L Regulator
The Model L is a two stage regulator/vaporizer. These units are coolant heated and are able to provide liquid vaporization to supply up to 325 hp (242 kW) peak or 200 hp (150 kW) continuous in industrial engine applications. The Model L regulator provides a negative outlet pressure of -1.5" w.c. (-0.37 kPa). No optional pressures are available. The Model L offers economical performance with full features; rear fuel inlet, and primary and secondary diagnostic test ports. Optional silicone diaphragm materials are also available.
Impco No. | Genuine Impco Part No. | Description |
LB | A000010595 | Model L Blue Spring with Silicone Diaphragm |
Model L Regulator
The Model L is a two stage regulator/vaporizer. These units are coolant heated and are able to provide liquid vaporization to supply up to 325 hp (242 kW) peak or 200 hp (150 kW) continuous in industrial engine applications. The Model L regulator provides a negative outlet pressure of -1.5" w.c. (-0.37 kPa). No optional pressures are available. The Model L offers economical performance with full features; rear fuel inlet, and primary and secondary diagnostic test ports. Optional silicone diaphragm materials are also available.
Impco No. | Genuine Impco Part No. | Description |
LB | A000010595 | Model L Blue Spring with Silicone Diaphragm |
MD-2100-1 Regulator
Fuel module for Toyota applications. Includes regulator and VFF30 fuelock.
Impco No. | Genuine Impco Part No. |
MD-2100-1 | A000012122 |
Model 120A Regulator
The 120A regulator is a two-stage engine coolant heated regulator/vaporizer. The 120A is equipped with an internal vacuum lock-off which automatically shuts off the fuel outlet when the engine stops.
Impco No. | Genuine Impco Part No. |
120A | 0971674 |