Continental Heater/Coolant Hose
- Premium construction coolant hose provides long service life
- Exclusive Versigard compound for heat and ozone resistance
- Two-spiral rayon reinforcement
- Meets SAE J20R3 D2 (low oil resistance, high temperature resistance, premium service)
- Temperature Range: -40°C to +125°C (-40°F to +257°F)
- Sold by the foot
| Size (in) | ID Min (in) | ID Max (in) | OD Min (in) | OD Max (in) | Weight (lbs/ft) | Min Burst PSI | Part No. |
|---|---|---|---|---|---|---|---|
| 3/4 | 0.720 | 0.783 | 1.035 | 1.098 | 0.24 | 200 | A000044098 |
Parker Hannifin Heater/Coolant Hose
- Heat and ozone resistant
- Two-spiral reinforcement
- Temperature Range: -40°C to +100°C (-40°F to +212°F)
- Sold by the foot
| Size (in) | ID Min (in) | ID Max (in) | OD Min (in) | OD Max (in) | Weight (lbs/ft) | Min Burst PSI | Part No. |
|---|---|---|---|---|---|---|---|
| 5/8 | 0.594 | 0.657 | 0.909 | 0.972 | 0.22 | 250 | A000045335 |
Parker Hannifin JIFFY™ Push-On Multipurpose Oil Resistant Hose
Jiffy Push-On/Push Lock Oil Resistant Multipurpose Rubber Hose is designed to transfer air, mild chemicals, oil, water and refined fuels such as biodiesel, diesel, ethanol and gasoline in applications to 212°F and 300 psi, Series 7212.
- Tube: Black Class A nitrile for exceptional fuel and oil resistance to 212°F and 300 psi.
- Tube: Silicone free to eliminate contamination of air powered paint spray systems.
- Reinforcement: One textile braid for strength and kink resistance.
- Cover: Chloroprene for abrasion, flame oil and weather resistance.
- Sold by the foot
| ID (in) | OD (in) | Weight (lbs/ft) | PSI | Part No. |
|---|---|---|---|---|
| 1/2 | 0.750 | 0.15 | 300 | A000064689 |
Continental Transmission Oil Cooler Hose
For use in connecting add-on and external transmission oil coolers.
- Working Pressure: 250 PSI
- Burst Pressure: 1000 PSI
- Tube: Black NBR
- Reinforcement: 2-Spiral Synthetic
- Cover: Black Hypalon (CSM)
- Temperature Range: -40° C to +121° C (-40° F to +250° F)
- Packaging Tolerances: Exact
- 25-Foot Section
| ID (in) | OD (in) | Weight (lbs/ft) | Part No. |
|---|---|---|---|
| 5/16 | 0.62 | 0.14 | A000036726 |
LPG Vapor Hose
This corrugated vapor hose is used to make the dry gas connection between the converter and the gaseous fuel carburetor. The hose is non-porous and is compatible with LP gas and natural gas vapor. Not for use with liquid propane or natural gas.
| Description | By the Foot | 50 Foot Coil |
|---|---|---|
| 1/2" Hose | A000037896 | - |
Parker Hannifin LPG Hose (SS25UL)
- Pressure Rating: 350 PSI
- Hose ID: 5/16"
- Hose OD: 0.68"
- Application: Liquefied petroleum gas hose
- Inner Tube: Synthetic rubber
- Reinforcement: One fiber braid and one stainless steel wire braid
- Cover: Fiber braid
- Temperature: -40° F to +250° F
- Fittings: 20 series, 22 series
| Description | Industry No. | Length | Part No. |
|---|---|---|---|
| 5/16" Hose | SS25UL-6 | By the Foot | A000011070 |
Please note: This hose cannot be used on CARB compliant trucks unless specified by the OEM.
LPG High-Pressure Hose Assembly (HA100 and HA100-W)
These high-pressure fuel hose assemblies are UL listed and 100% tested for leaks. After testing, the hose ends are plugged to prevent contamination. Each hose assembly is measured from the ends of the fittings.
- Tube: Black Nitrile
- Cover: Rubber impregnated textile braid
- Reinforcement: One stainless steel braid
- Hose Ends: 3/8 SAE female flare – straight (5/8 x 18 thread pitch)
- Protective Cover: Galvanized steel wire spring (HA100-W only)
- Temperature Range: -40° F to +180° F (Note: Hose is capable of this rating. However, LPG should never be elevated above 100° F during conveyance.)
- Maximum working pressure: 350 PSI
- Burst pressure: 1750 PSI
- ID: 5/16"
- OD: .675"
- Minimum bend radius: 4.0"
| Length | Wire Covered | Part No. | w/o Wire | Part No. |
|---|---|---|---|---|
| 12" | HA100-12W | A000038919 | HA100-48 | - |
Please note: This hose cannot be used on CARB compliant trucks unless specified by the OEM.
LPG High-Pressure Hose Assembly (HA101 and HA101-W)
These high-pressure fuel hose assemblies are UL listed and 100% tested for leaks. After testing, the hose ends are plugged to prevent contamination. Each hose assembly is measured from the ends of the fittings.
- Tube: Black Nitrile
- Cover: Rubber impregnated textile braid
- Reinforcement: One stainless steel braid
- Hose End 1: 3/8 SAE female flare – straight (5/8 x 18 thread pitch)
- Hose End 2: 1/4 NPT male pipe thread (1/4 x 18 thread pitch)
- Protective Cover: Galvanized steel wire spring (HA101-W only)
- Temperature Range: -40° F to +180° F (Note: Hose is capable of this rating. However, LPG should never be elevated above 100° F during conveyance.)
- Maximum working pressure: 350 PSI
- Burst pressure: 1750 PSI
- ID: 5/16"
- OD: .675"
- Minimum bend radius: 4.0"
| Length | Wire Covered | Part No. | w/o Wire | Part No. |
|---|---|---|---|---|
| 20" | HA101-20W | A000039720 | HA101-32 | - |
Please note: This hose cannot be used on CARB compliant trucks unless specified by the OEM.
LPG High-Pressure Hose Assembly (HA9)
Part Number: A000039725
This 34" high-pressure fuel hose assembly (HA100-34) is UL listed and 100% tested for leaks. After testing, the hose ends are plugged to prevent contamination. Each hose assembly is measured from the ends of the fittings.
- Tube: Black Nitrile
- Cover: Rubber impregnated textile braid
- Reinforcement: One stainless steel braid
- Hose Ends: 3/8 SAE female flare – straight (5/8 x 18 thread pitch)
- Includes: Rego 7141F coupling (p/n - A000002285) and a 49 x 6 UL fitting
- Temperature Range: -40° F to +180° F (Note: Hose is capable of this rating. However, LPG should never be elevated above 100° F during conveyance.)
- Maximum working pressure: 350 PSI
- Burst pressure: 1750 PSI
- ID: 5/16"
- OD: .675"
- Minimum bend radius: 4.0"
Please note: This hose cannot be used on CARB compliant trucks unless specified by the OEM.