Marathon Pow’r Pak LD On-Board Power System

Marathon Pow'r Pak LD
Application
- The Marathon Pow'r Pak LD is an integrated valve-regulated lead acid battery and charging system designed for 24-volt electric walkie pallet trucks with loading capacities of up to 4,500 pounds.

System Design - The Marathon Pow’r Pak LD houses a “smart” HF charger complete with auto stop/start capabilities and four 6-volt Marathon Element bloc batteries connected in series to provide a 24 volt system.

Less Maintenance - Marathon Element batteries mean reduced maintenance. Most of the expense, time and safety concerns typically associated with conventional flooded battery maintenance are reduced under normal operating conditions, including cell watering, acid equalization, acid spills, corrosion and waste treatment systems.

Automatic On-Board Charger - Because the on-board Delta-Q charger used with the Marathon Pow'r Pak LD is fully automatic, operator guesswork is eliminated. Unlike other chargers, this charger uses the precise 'I-E-I' charge profile to correctly determine the proper recharge time required. Charging begins with a constant 25 amp start rate until the batteries reach the appropriate gassing voltage. At this point, the charge adjusts to a constant voltage stage to minimize gassing, finishes off with a constant current to ensure a quick and complete charge, and finally shuts down automatically when the batteries are fully recharged. International versions are available.

Opportunity Charging Benefits - With the Marathon Pow'r Pak LD, battery charging is simple and efficient, offering operators freedom from charging limitations of conventional flooded batteries. Operators can take full advantage of extended breaks or downtime between shifts to opportunity charge their Marathon Pow'r Pak LD, which translates into better use of operator time and increased productivity. Optimum Depth of Discharge for opportunity charging is between 30% - 70%. A minimum charge time of 1/2 hour and an additional cool down period is recommended for best results.

Freight - Free within the 48 contiguous states with the purchase of six or more.

*Please note: Marathon Pow'r Pak LD is formerly Element Pallet Pro. The new replacement battery, part number A000061181, does not replace part number A000031797 that was used in Pallet Pro products. A000031797 has been discontinued by Exide Technologies with no replacement.


Part Number: A000061209

Fits: Volts AH Capacity (C/6) Length Width Overall Height Weight Replacement Charger *Replacement Battery
Most Raymond, Cat lift truck, Crown, Mitsubishi forklift truck, Toyota, Nissan, Barrett 24 184 27.30" 8.66" 26.54" 321 lbs. A000061181

Part Number: A000061210

Fits: Volts AH Capacity (C/6) Length Width Overall Height Weight Replacement Charger *Replacement Battery
Most Hyster and Yale 24 184 27.30" 7.50" 26.54" 365 lbs. A000061181

Part Number: A000061211

Fits: Volts AH Capacity (C/6) Length Width Overall Height Weight Replacement Charger *Replacement Battery
Cat lift truck WP4500 / Mitsubishi forklift truck PMW23N / Jungheinrich EJE120 (Old Series) 24 184 25.25" 8.50" 24.95" 365 lbs. A000061181

Part Number: A000061212

Fits: Volts AH Capacity (C/6) Length Width Overall Height Weight Replacement Charger *Replacement Battery
Toyota 6HBW23, 7HBW23, 7BWS10, 7BWS13 24 184 26.50" 7.50" 26.54" 365 lbs. A000061181

Pallet Pro Replacement Chargers

Refer to the chart below to find the correct replacement charger. Model numbers can be located on the data sticker located on the top of each Pallet Pro and the side of each charger.

Pallet Pro Model Charger Model Replacement Charger
M90004S24ELETM IC0650-04 A000028479